China High Strength Tapered Roller Bearings 447/432X 53162/53387 HM903244/HM903216 526/522 HM807035/HM807010 11165X/11315 12168/12303 65383/65320(HM903244/HM903216)

Bearing type: Inner ring type/Outer diameter type Inner diameter x Outer diameter x Height (mm) 447/432X 41.275x95.25x31.753 1.06 53162/53387 41.275x98.425x30.958 1.05 HM903244/HM903216 41.275x98.425x30.958 1.13 526/522 41.275x101.6x34.925 1.42 HM807035/HM807010 41.275x104.775x36.512 1.66 464A/453A 41.275x107.95x27.783 1.39 464/453A 41.275x107.95x27.783 1.38 541/532X 41.275x107.95x36.512 1.72 11165X/11315 42x 80x18.009 0.38 461/453X 42.85x104.775x30.162 1.31 461/453 42.85x107.95x 27.795 1.42 461/454 42.85x110x27.795 1.49 12168/12303 42.862x76.992x17.462 0.33 22168/22325 42.862x82.55x19.842 0.44 22780/22720 42.862x82.55x26.195 0.6 25578/25520 42.862x82.931x23.812 0.58 25578/25523 42.862x82.931x26.988 0.62 25576/25521 42.862x83.058x23.812 0.57 25578/25522 42.862x83.058x23.876 0.58 3579/3525 42.862x87.312x30.162 0.8 65383/65320 42.862x114.3x44.45 2.35

• 1.Structural Features: Both inner and outer rings feature tapered raceways, with truncated cone-shaped rolling elements. The inner ring, outer ring, rolling elements, and cage collectively form a complete, separable assembly.
• 2.Load-bearing capacity: Capable of simultaneously withstanding radial loads and unidirectional axial loads. Axial load capacity increases with contact angle; a larger contact angle makes it suitable for applications where axial loads constitute a higher proportion.
• 3.Applicable Conditions: Commonly used in machinery subjected to combined loads, such as automotive hubs, axles, and gearboxes, as well as machine tool spindles and mining equipment. Particularly suitable for low-to-medium speed applications involving impact or vibration.
• 4.Installation Requirements: Adjust the clearance during installation (achieved through relative axial displacement between the inner and outer rings). Excessive clearance may cause vibration and noise, while insufficient clearance may accelerate wear due to increased heat generation. A suitable locking device must be used in conjunction.
• 5.Performance Limitations: Cannot withstand bidirectional axial loads. For bidirectional load-bearing requirements, must be installed in pairs with opposing directions.